TECE TECEprofil toilet module 9300102
- with integrated hygiene flushing function, hot and cold water
- Installation height 1120 mm
- WC module including "easy fit" actuator plate mounting. For mounting on profile tubes or for installation in metal or wooden stud walls and as a wall-mounted or corner module also suitable for single block mounting.
- Universal cistern for front actuation: Cistern with integrated hygienic flush
- Completely pre-installed flushing unit with hygienic flushing function
- Multi-way shut-off valves with function
- For flushing the pipes before commissioning, two cistern connections with external thread R 1/2" at the top.
- For flushing hot and cold water pipes (2 x cold water possible)
- compatible with quick adapters
- Safety tank made of impact-resistant plastic
- Tested according to EN 14055, cistern completely pre-assembled and sealed
- 10 l tank volume, 6 l preset standard rinsing quantity
- 4.5/7.5/9 l flush volume adjustable at any time; 3 l partial flush with dual-flush technology; residual volume usable for immediate cleaning flush
- Condensation-insulated
- for TECE flush plates and toilet fittings
- usable as a single or dual flush cistern
- "easy fit" actuator plate mounting
- Installation tunnel for service opening
- Can be shortened without tools
- low-noise hydraulic filling valve
- Valve group 1 according to DIN 4109
- Mains connection with transformer and connection cable
- Level sensor
- protects against backflow
- in the toilet cistern
- Operation via Bluetooth interface using the TECE Smartflow app
- optionally via BMS interface
- stepless adjustment of the rinsing intervals and rinsing volume
- Setting the flushing days and flush volume
- Logging of the flushing history
- The modular frame is self-supporting.
- powder-coated
- two retaining bolts and nuts M12
- WC drain bend DN 90 with transition adapter DN 90/100 made of PP
- Transition adapter also suitable for horizontal installation
- WC connection set DN 90
- WC connection box with rough construction protection
- with junction box and cover for transformer
- Adjusting a raised ceramic mounting for a 48 cm seat height
- possible according to DIN 18040 (DIN 18040 Barrier-free building - Part 1: Publicly accessible buildings and workplaces)
