Jung Pumpen compli sewage lifting station JP50076
The submersible single unit consists of a stepped plastic (PE) container with an optimized base to reduce deposits and blockages, a cast iron support plate with an integrated ring housing, a mounted motor, a non-return valve and a pressure outlet.
Container:
Dimensions: 445 x 605 x 540 mm (H x W x D)
Container capacity: 50 l
DN 70 ventilation pipe connection with slip coupling, optionally available as a DN 50 coupling.
4 inlets DN 100/50 on three sides and top.
Design as a sleeve with clamping flange and insertion limiter.
Inlet height at the sides: 180 mm
Additional 50 mm vertical connection as a socket for e.g. a hand diaphragm pump.
Additional connection 50 mm horizontal as a sleeve
Connection flange DN 80
Elastic connection with 2 clamps for pressure pipe with an outer diameter of 90 mm
Submersible motor pump, vertical, single-stage, for pumping wastewater according to DIN 1986-3,
Ready for operation, mounted on the container, free-flow wheel with large
Free passage, dry-running safe due to permanent grease filling, motor thermostat for overheating protection, cable entry longitudinally watertight potted
and interchangeable via plug connection.
Clear passage: 50 mm
Flow rate Q: 33-13 m³/h
Delivery head H: 1-9 m
Motor protection class: IP 68
Voltage: 1/N/PEx230
Motor power P2: 0.95 kW
Engine speed n: 2725 rpm
Operating mode: S3 according to VDE
Pressure connection: DN 80
Weight: 31 kg
Steering:
Automatic and water level-dependent switching on and off
Level sensor built into the container.
Connector housing, 121x66x55 mm (HxWxD),
Protection class IP 44, 4m cable,
LED indicator "ready for operation"
Manual-0 automatic switch
Mains-powered alarm buzzer
Potential-free collective fault signaling contact
| Suitable for feces | Yes |
| Container material | plastic |
| Material quality of the container | PE-80 |
| Pump housing material | cast iron |
| Material quality of the pump housing | Cast iron GG 25 (GJL-250) |
| Suitable for outdoor use | No |
| Position behind the toilet bowl | No |
| Container volume | 50 l |
| Number of pumps | 1 |
| Maximum delivery head | 10 m |
| Max. dimensions of fixed parts | 525 mm |
| With cutting unit | No |
| Connection inlet | clamping ring |
| Diameter of connection on the supply side | DN 100 |
| Diameter of connection on the supply side | 110 mm |
| Number of inlet openings | 2 |
| Connection print side | flange |
| Diameter of connection on the pressure side | DN 80 |
| Diameter of connection on the pressure side | 90 mm |
| With non-return valve | Yes |
| Pressure stage flange | PN 2.5 |
| With ventilation | Yes |
| Connection voltage | 1 x 230 V |
| frequency | 50 Hz |
| Recorded engine power (P1) | 1370 W |
| Motor output power (P2) | 980 W |
| Rated current | 6 A |
| Protection rating (IP) | IP68 |
| Insulation class according to IEC | B |
| Electrical connection | Connection cable with plug |
| Width | 525 mm |
| depth | 525 mm |
| Height | 498 mm |
| Alarm function | Yes |
| Alarm output | Yes |
