Jung Hebefix Pro lifting system JP50050
- Plug-in lifting station for faeces-free domestic wastewater, such as from sinks, bathtubs, showers, washing machines.
- As well as for aggressive media such as condensate from condensing boilers, brine from water softening systems and aqueous
- Solutions up to 15% salt content.
- The Hebefix Pro is installed directly in the room where the drainage items are located.
- Alternatively, the Hebefix Pro can be installed in standard pre-wall systems with an internal width of at least 180 mm.
- Note: For pre-wall systems, please provide a maintenance opening measuring 500 x 500 mm (H x W). Or directly in the area containing the drainage equipment. If the water level is too high, the alarm device will warn with a loud buzzer. The alarm can be relayed via a potential-free contact.
- container
- Dimensions: 411x425x183 mm (HxWxD)
- Weight: 7 kg
- 1 pressure outlet
- 4 inlet nozzles d=50 mm
- 1 top inlet d=40 mm
- Scope of delivery:
- 1 Hebefix PRO
- 1 check valve 1¼ "
- 1 hose elbow
- 2 nipples
- 6 hose clamps
- 2 cuffs
- 3 plug-in seal
- 2 dowels
- 2 hook screws
- 1 sealing plug
- 1 activated carbon filter
- Submersible motor pump
- vertical, single-stage, dry-running safe, mounted in the tank, automatically reactivating, temperature-dependent motor protection, dry-running safe SIC mechanical seal on the medium side and oil chamber and radial shaft seal on the motor side, motor housing and rotor shaft made of stainless steel, pump housing and impeller made of plastic.
- Protection class: IP 68
- Free passage: 10 mm
- Flow rate: Q max 6.5 cbm/h
- Delivery head: H max 7 m
- Motor power: P2 = 220 W
- 2745 1/minVoltage: 1/N/PE 230V, 50 Hz
- Cable: 4 m H07 RN8-F-4G0.75
