Geberit FlowFit fittings and pipes
Here you will find the complete range of the new, innovative Geberit FlowFit supply system. The Geberit FlowFit system is characterized by its flowing and easy installation and puts particular importance on hygiene, safety and economy. The innovative Geberit FlowFit fittings are provided with protective caps and can be installed time-savingly, easily and, above all, safely. The Geberit FlowFit system is available in dimensions ranging from d16 to d75 and can be pressed with just two pressing jaws. It is mainly suitable for heating and drinking water installations, but the FlowFit supply system can also be used for compressed air, gas, cooling and process water. The fittings from the FlowFit series can be pressed laterally, which guarantees more safety and convenience during installation. Thus, the Geberit FlowFit press tool grips around the press indicator and guarantees a permanently leak-tight connection.
-
Geberit FlowFit T-piece 620102001 DN 20/15/15, Ø 25/20/20 mm, 11.9 cm, reducedIn Stock delivery time: 1-3 working daysShipping Cost Points: 5 -
Geberit FlowFit transition elbow 620540001 DN 12/15, Ø 16 mm, R 2000 / 2, 90 degrees, with internal threadIn Stock delivery time: 1-3 working daysShipping Cost Points: 1 -
Geberit FlowFit transition 620403001 DN 25, Ø 32 mm, Rp 2000 , with internal threadIn Stock delivery time: 1-3 working daysShipping Cost Points: 5 -
Geberit FlowFit PPSU bend 620074001 DN 32, Ø 40 mm, 90 °In Stock delivery time: 1-3 working daysShipping Cost Points: 5 -
Geberit FlowFit transition 620630001 DN 12/15, Ø 16 mm, G 2000 / 2, 6.4 cm, with union nutIn Stock delivery time: 1-3 working daysShipping Cost Points: 1 -
Geberit FlowFit seat shut-off valve 619831001 Ø 20 mmIn Stock delivery time: 1-3 working daysShipping Cost Points: 10 -
Geberit FlowFit transition 620633001 DN 25, Ø 32 mm, G 2000 , 7.8 cm, with union nutIn Stock delivery time: 1-3 working daysShipping Cost Points: 5 -
Geberit FlowFit transition 620632001 DN 20, Ø 25 mm, G 3/4, 6.5 cm, with union nutIn Stock delivery time: 1-3 working daysShipping Cost Points: 5 -
Geberit FlowFit transition 620421001 DN 15/20, Ø 20 mm, Rp 3/4, with internal threadIn Stock delivery time: 1-3 working daysShipping Cost Points: 1 -
Geberit FlowFit transition 620642001 DN 20/25, Ø 25 mm, G 2000 , 7.3 cm, with union nutIn Stock delivery time: 1-3 working daysShipping Cost Points: 5 -
Geberit FlowFit Elbow tap connector 90° 620771001 DN 15, Ø 20 mm, Rp 2000 / 2, 7.8 cm, 90 degreesIn Stock delivery time: 1-3 working daysShipping Cost Points: 5 -
Geberit FlowFit seat shut-off valve 619832001 Ø 25 mmIn Stock delivery time: 1-3 working daysShipping Cost Points: 10
The highlights of the Geberit FlowFit fittings
Press indicator for safe installation: To ensure that the installation is absolutely safe and reliable, the Geberit FlowFit fittings have a press indicator that falls off when the connection is inseparable and securely pressed. This indicator does not allow incorrect pressing. In addition, every Geberit FlowFit fitting has a viewing window through which the plug-in depth can be checked. The color of the fitting matches the color of the press jaw, so that mix-up is impossible.
Practical pressing tool: Only two different pressing jaws are required for the eight FlowFit dimensions ranging from d16 to d75. This guarantees a quick and uninterrupted installation. The FlowFit dimensions up to d40 can even be pressed with Geberit handheld crimping pliers. This is handy and space-saving.
Protective covers for optimal hygiene: The protective covers on the Geberit FlowFit fittings, pipes and threaded fittings ensure optimal and perfect hygiene. In this way, the fittings are kept clean and dust-free until final assembly. The fittings also ensure an optimized flow rate and lower pressure losses.
Multi-layer composite pipe system: The Geberit FlowFit pipes are multi-layer composite pipes and consist of three layers. The inner and outer layers are made of polyethylene and the middle layer is made of aluminum. The pipe is thus protected from mechanical damage and corrosion and can be used without hesitation for all drinking water qualities. The Geberit FlowFit pipes are available as rods, rolls and pre-insulated pipes.
Connection to existing connections: Thanks to the universal Geberit MasterFix transition, the Geberit FlowFit system can be connected to all Geberit fittings connections without tools. In addition, the FlowFit system is compatible with the PushFit system. This system can also be connected to all Geberit piping systems with the help of adapters.