Geberit Monolith Plus sanitary module 131231TD7
- Glass front panel
- for wall-hung toilets
- for renovations
- Conversions and new buildings
- for wall connections with a drain height > 23 cm
- for replacing low-hanging surface-mounted cisterns
- for replacing semi-high wall-hung cisterns
- for replacing wall-hung toilets with surface-mounted cisterns
- for replacing wall-hung toilets with pressure flush valves
- For replacing wall-hung toilets with concealed cisterns with a maximum service opening height of < 109 cm
- for Geberit AquaClean complete toilet systems
- for connecting Geberit AquaClean toilet seats
- with accessories
- for installation on finished floors
- For mounting in front of drywall and solid walls
- For compensating for offsets between toilet connections and wall drains via stepped connection spigots for wall-hung toilets
- Width 50.5 cm
CHARACTERISTICS
- Dual flush
- Compensation for construction tolerances is possible
- Height adjustable up to 7 cm
- Condensation-insulated toilet cistern
- Brushed aluminum side panels
- Self-supporting
- Soft-touch buttons for flush activation
- DALI-compatible control
- Settings can only be changed using the Geberit Home app.
- With ComfortLight
- Lighting mood continuously adjustable from orientation light to daylight
- Adjustable interval flushing
- User detection range adjustable
- Odor extraction with ceramic honeycomb filter can be activated.
- Odor extraction with after-run function
- Ceramic honeycomb filter for odor neutralization, replaceable without tools.
- Mains connection with three-core flexible sheathed cable
- Water connection at the rear center
- Light color continuously adjustable from warm white to cool white
- Side water connection possible with accessories
- Water connection at the bottom
TECHNICAL DATA
- Protection class IPX4
- Nominal voltage 100–240 V AC
- Operating voltage 12 V DC
- Mains frequency 50–60 Hz
- Power consumption in standby mode: max. 0.5 W
- Flow pressure 10–1000 kPa
- Maximum water temperature: 25 °C
- Flush volume factory setting 6 / 3 l
- Large flush volume, adjustable range 4–6 l
- Small flush volume 3 l
- Flow rate at 300 kPa / 3 bar: 9.6 l/min
- Minimum flow pressure for calculation flow rate: 50 kPa
- Calculated flow rate 0.11 l/s
- Light color 2200–4000 K
SCOPE OF DELIVERY
- Water connection set with 2 angle valves 1/2"
- Flushing elbow extension 160 mm
- EPDM cuff, ø 44 / 55 mm
- PE-HD connection fitting, ø 90 mm
- PE-HD transition sleeve, ø 90 / 110 mm
- 2 threaded rods M12
- Soundproofing set
- Coupling socket for mains connection
- power supply
- baseboard
- Drywall fastening material
- Mounting hardware
- Mounting hardware for installation in front of concealed cisterns
